Injection Moulding
Plastic Injection moulding is a process whereby granuals of thermoplastic or rubber are heated up to a liquid state and injected into a steel or aluminium mould.
At Trimfix we are here to guide you from conception, through design, production of a mould tool and material and colour choice to achieve your desired product.
Tooling allowing during the moulding process we are able to overmould plastic, stainless steel, brass or mesh inserts and overmould plastic or rubber.
If you already have tooling - our current mould shop consists of:
| LOCK TON | SHOT WEIGHT GRAMS | TIE BAR SPACING | MOULD HEIGHT MINIUM | OPEN STROKE MAXIMUM |
| 25 | 40 | OPEN | 150 | 330 |
| 35 | 45 | 254 x 280 | 200 | 500 |
| 40 | 110 | 320 x 320 | 150 | 325 |
| 60 | 75 | 320 x 370 | 200 | 600 |
| 60 | 120 | 320 x 320 | 150 | 425 |
| 90 | 90 | 370 x 420 | 250 | 725 |
| 100 | 150 | 420 x 470 | 250 | 750 |
| 150 | 350 | 500 x 500 | 250 | 650 |
| 350 | 1,000 | 710 x 710 | 300 | 670 |
We understand that each customer has individual requirements and we are able to offer a number of services to accommodate your needs such as:
- Full & Sub-Assembly
- Individually Packaging and Labelling of parts
- Special handling of parts (operators wearing gloves etc)
Adobe Acrobat document [233.0 KB]
Trimfix Mouldings
Unit 11 Leigh Road
Haine Industrial Estate
Ramsgate
Kent
CT12 5EU
England
+44 1843 585698+44 1843 585698
enquiries@trimfix.co.uk
Our reception is manned during the following times:
Mon - Thurs : 08.00 - 17.30
Fri : 08.00 - 12.00
Fridays by appointment only
Adobe Acrobat document [611.8 KB]
Adobe Acrobat document [154.3 KB]
Adobe Acrobat document [233.0 KB]
Print 